English
简体中文Aluminum alloy air-conditioning vents or decorative vents have a certain price advantage. It is relatively cheaper than other materials such as stainless steel, wood, etc.
The aluminum alloy air outlet can be made into a square or a rectangle according to the requirements of use, which can meet the decoration requirements of any ceiling. The inner core part of the diffuser can be detached from the outer frame for easy installation and cleaning. The rear can be equipped with an air outlet adjustment valve to control and adjust the air volume. Suitable for studios, hospitals, theaters, classrooms, concert halls, libraries, entertainment halls, theater lounges, general offices, shops, hotels, restaurants, and gymnasiums. In order to avoid noise interference and discomfort in various environments, in addition to determining the neck wind speed according to the performance table, it is also necessary to consider the installation height and installation occasion.
The main frame selects a profile with a thickness of 15mm. The profile should be fixed in the square hole and the shape connected branch into a square hole, connecting the square frame. The surface of the main frame is coated with sand nylon mesh, and the air outlet of the central air conditioner uses rubber beads to press the edge of the nylon sand network into the concave groove of the aluminum alloy profile to fix the nylon sand network. Add a non-woven air filter cotton layer. The fixed frame is made of trough-shaped aluminum box, the outer square edge is smaller than the inner frame of the main frame, and the filter cotton quadrilateral is pressed on the box to be squeezed and fixed in the fixed frame. The main frame and two border M5 screws, the A/C socket box has one M5 threaded hole in the attack, the M5 screw and the A/C socket border are connected by thread.
